Zigbee wireless inclinometer sensor in the global common 2.4GHz ISM
ZCT215M-LWS-AZ-E3 , the wireless inclinometer is based on Zigbee transmission technology , with max measuring range of +-15°, support MODBUS RTU protocol. Built-in RTC、smart sleep and awake function, suitable for industrial field , buildings and civil engineering monitoring system.
Zigbee wireless communication Industrial level, long distance transmit of 2000m Work in universal 2.4GHz ISM frequency band
Angle measure, leveling and zero trim Safe control, monitoring and alarm Initial control and tilt posture record
Technical parameter （at room environment （25℃） ）
Power of 12V
Sleep work current
Power 12V（sleep state）
Peak work current
（2Km communicate distance ,Zigbee send and receive）
X axis, Y axis
Room temp, 9600baud
Cross axis error
Zero temp drift4
Power start time
Aluminum alloy housing
Remark 1: with limit of the DC 3V button battery supplying for the buit-in RTC chip, the sensor’s work temp is -20-60℃. Remark 2: the smallest angle can be detected in the measuring range. Remark 3: differences between the actual value and the displayed value Remark 4: at room temp, with fixed zero output, the deviation changed with environment temp. Remark 5: time required for biaxial sensor angle output updating one time. In ask and answer mode, at least 30ms is required between two time angle command inquiry .
Zigbee module technical specification
Work frequency band
ISM frequency band
1. Zigbee module should be set in advance , to make sure all network relevant info is correct. The sensor is with external power( battery is also acceptable). Battery value can be read by command. When power value is less than DC 8Vol, indicate lamp will shinning and remind it is with a lower battery. 2. Sleep mode. Two mode----default sleep (based RTC clock, adjustable timing) and non-sleep mode . Non-sleep is default mode, when sleep mode is used, please set suitable time to make sure the network going on as normal. 3. Connect with sensor 1）Zigbee network Set network info in advance accordingly, and it can be worked after power on. 2）Build connection Once the network is normal, successfully networking, center node sending frame info, connection can be built. 3）set sleep mode Firstly set sleep interval and wait time ,a nd the interval should be not less than wait time, then after sending sleep command, it will come into sleep mode. 4）sensor data read and parameter set As long as the sensor is not in sleep mode, or awaking from sleep mode, according the Modbus protocol command, data read and parameter set can be realized . 5）open connection If host pc sleep command or sensor wait time is over time, sensor will come into sleep mode constrainedly and will be awake till next awake time is on. 。 5.serial communication port set Baud rate of the serial communication port of the module which is connected with ZIGBEE module , is 9600bps. Single byte format:
Name: wireless inclinometer Brand: ZC Original: china Products made of stainless steel and plastic,Safe control, monitoring and alarm.We treat every detail carefully
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.