High accuracy dual axis digital universal protractor
angle measure instrument
approx. 51 (L) x 51 (W) x 27 (D) mm (2.01' x 2.01' x 1.06' inch)
Packaging & Delivery
The package of digital protractor
One set digital protractor in one box, then packed in a carton.
Attention: No broken product in the carton.
It depends on the ordered quantity for digital protractor.
The general description of digital protractor
Small and portable design Fast and accurate measurement Degree and Percentage of slope in conversion Measuring range of 4 x 90 ° with ±0.1 ° repeatability Large and clear LCD display with 0.1 ° resolution Hold Measured data Calibrate button to calibrate the meter to any reference surface Three built-in magnets on the base can attach any magnetic surfaces
The Feature of digital protractor
Small and portable design
Fast and accurate measurement
Degree and Percentage of slope in conversion
Measuring range of 4 x 90 ° with ±0.1 ° repeatability
Large and clear LCD display with 0.1 ° resolution
Hold Measured data
Calibrate button to calibrate the meter to any reference surface
Three built-in magnets on the base can attach any magnetic surfaces
The unit will directly enter the state of absolute angle measurement every time be turned on (No matter change the batteries)
Absolute and relative measurement conversion
The technical parameters of digital protractor
40 ~ 80
3 x 3V CR2032 Batteries (not included)
approx. 51 (L) x 51 (W) x 27 (D) mm (2.01’ x 2.01’ x 1.06’ inch)
The Application of digital protractor
Drainage angles and run-off slopes
Tool setting on Lathes
Setting blade angle of Circular Saws
Setting blade angle of Miter Saws
Setting work piece angle for milling
Grader and tractor work alignment
Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
The product information of digital protractor
1.Set the gauge flat on a reference surface such as a table saw, miter saw, or jointer table. On a band saw, the blade will be the reference surface.
2.Turn ON and press the ZERO to set the gauge to 0.0 degrees which calibrates the reference surface. (see Figure 1)
3.Attach to the saw blade or jointer fence using the imbedded magnets. (see Figure 2) The gauge should always be kept perpendicular to the table for all measurements. (see Figure 3)
4.A properly adjusted saw blade, jointer fence or band saw table will display 90.0 degrees. If the reading is off, re-adjust your machine following the manufacturers instructions.(see Figure 4)
5.Now you can press ZERO to set the gauge to 0.0 degrees and measure the angle of your saw blade, jointer fence or band saw table. (see Figure 5 & 6)
6.Replace the battery by rotating the cover on the back of the gauge counter clockwise. (see Figure 7)
1.Experienced staffs answer all your questions in fluent English.
2.Customizde design is available.OEM productsare welcomed.
3.Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers
We are the manufactureof tilt sensor and position sensor in shanghai china.Our sensor is based on MEMS technology. As a professional manufacturer of tilt sensor in China, we can provide following service for you: